# leave at least one comment here to skip the BOM character
# language name
lang => Dansk
# Common
Settings saved => Indstillingerne er gemt
Settings not saved => Indstillinger er ikke gemt
Save Changes => Gem ændringerne
Apply Changes => Aktiver ændringer
Clear Changes => Glem ændringerne
Review Changes => Se ændringer
Host Name => Værtsnavn
Uptime => Oppetid
Load => Systembelastning
Version => Version
Categories => Kategorier
Subcategories => Underkategorier
more... => mere...
Add => Tilføje
Remove => Fjern
Warning => Advarsel
Password_warning => Der er ikke sat noget kodeord eller løsen på hverken Webadministration eller SSH.
Vær venlig at vælge og/eller indtaste dit kodeord (Brugernavn er 'root' med små bogstaver).

# Categories
Info => Info
About => Om OpenWrt
Router Info => Routerinformation

Status => Status
Connections => Netværksforbindelser
DHCP => DHCP
Wireless => Trådløs

System => System
Password => Kodeord
Settings => Indstillinger
Installed Software => Installeret programmel
Firmware Upgrade => Firmware opgradering

Network => Netværk
LAN => Lokalnet
WAN => Internet
Wireless => Trådløs
Advanced Wireless => Avanceret trådløs
Hosts => Værtsnavne

# 'About' page
Copyright => Ophavsret

GPL_Text => Dette program er fri software.  De må bruge, ændre og videredistribuere det under betingelserne for "GNU General Public License",
 som offentliggjort af "Free Software Foundation" (Den frie softwarebevægelse), enten i version 2 af licensen eller (efter deres valg), en hvilkensomhelst senere version.

Contributions by => Bidrag fra
Layout based on => Layoutet er baseret på
by => af

No config change. => Ingen konfigurationsændring foretaget
Config discarded. => Konfigurationsændringerne blev kasseret
Config changes: => Foreløbige ændringer
Updating config... => Sætter ændringerne i kraft

# 'Router Info' page
Firmware Version => Firmwareversion
Kernel Version => Kerneversion
Current Date/Time => Aktuel dato/tid
MAC Address => MAC adresse

# 'Connections' page
Connection Status => Forbindelsesstatus
Physical Connections => Fysiske forbindelser
Router Connections => Routerens forbindelser

# 'DHCP' page
status_leases_dhcp_leases => DHCP leasinger
status_leases_IP => IP adresse
status_leases_MAC => MAC adresse
status_leases_Name => Navn
status_leases_Expires => Udløbstid

# 'Wireless Status' page
Wireless Status => Trådløs status

# 'Password' page
Password Change => Ændre kodeord
New Password => Nyt kodeord
Confirm Password => Nyt kodeord igen

# 'System Settings' page
System Settings => Systemindstillinger
Host Name => Værtsnavn
Language => Sprog

# 'Installed Software' page
Installed Packages => Installerede pakker
Update package lists => Opdater pakkelisten
Uninstall => Afindstaller
Install => Installer

# 'Firmware Upgrade' page
Firmware format => Firmwareformat
Error => Fejl
done => færdig
Invalid_format => Ubrugelig_format
Erase_JFFS2 => Slet JFFS2 partitionen
Options => Tilvalg
Firmware_image => Firmwarefil:
Upgrade => Opgradere
Upgrading... => Opgraderer...

# 'LAN Settings' page
LAN Settings => Lokale netindstillinger
LAN Configuration => Lokal netværkskonfiguration
Netmask => Undernetmaske
Default Gateway => Standard gateway
DNS Servers => DNS-Server
DNS Address => DNS-Serveradresse

Note => Bemærk

# 'WAN Settings' page
WAN Settings => Internet indstillinger
WAN Configuration => Internetkonfiguration
PPTP Server IP => PPTP-serveradresse
Connection Type => Forbindelsestype
No WAN => Ingen Internetopsætning
DHCP => DHCP
Static IP => Statisk IP
IP Settings => IP indstillinger
PPP Settings => PPP indstillinger
Redial Policy => Genopkaldspolitik
Connect on Demand => Forbind når behovet er der
Keep Alive => Hold forbindelsen i live (keep alive)
Maximum Idle Time => Maksimal tid i tomgang (max idle)
Redial Timeout => Opkaldstimeout
MTU => Maksimal pakkestørelse (MTU)
Username => Brugernavn

# 'Wireless Configuration' page
Wireless Configuration => Trådløs konfiguration
Wireless Interface => Trådløs netkort
WEP Key => WEP nøgle
Selected WEP Key => Valgt WEP nøgle
WPA PSK => WPA nøgle
ESSID => ESSID
Channel => Kanal
RADIUS IP Address => IP adressen på RADIUS server
RADIUS Server Key => Kodeord til RADIUS server
Enabled => Aktiveret
Disabled => Deaktiveret
ESSID Broadcast => ESSID-Broadcast 
Show => Vis
Hide => Skjul
WLAN Mode => Trådløs tilstand
Access Point => Access Point
Client => Klient
Bridge => bro
Ad-Hoc => Ad-Hoc
Encryption Settings => Krypteringsindstillinger
Encryption Type => Krypteringstype
PSK => PSK kode
WPA Mode => WPA tilstand
WPA Algorithms => WPA krypteringsalgoritme
WEP Keys => WEP nøgler

# 'Advanced Wireless Configuration' page
Advanced Wireless Configuration => Avanceret opsætning af trådløs
WDS Connections => WDS forbindelser (WDS repeater)
MAC Filter List => Filteringsliste (MAC-numre)
Filter Mode => Filtreingstilstand
Allow => Tillad
Deny => Forbyd
Set => Sæt
Settings => Indstillinger
Automatic WDS => Automatisk WDS forbindelse

# "Hosts" page

MAC Address => MAC adresse
Configured Hosts => Værtsnavne
DHCP Static => Statiske IP adresser til DHCP
Host Names => Værtsnavne

Up => Op
Down => Ned
Edit => Rette
Delete => Slette
Save => Gemme
Cancel => Annullere

Forward => Forward (videresend)
Accept => Accept (tillad)
Drop => Drop (smid væk)

Firewall => Firewall
Firewall Rules => Firewall regler
Firewall Configuration => Firewallkonfiguration

New Rule => Ny regel
Match => Match (sammenlign)
Target => Target (Gå til)
Port => Port

Protocol => Protokol
Source IP => Afsenders IP
Destination IP => Modtagers IP
Source Ports => Afsender porte
Destination Ports => Modtager porte

Forward to => Send videre til
Port => Port

Helptext ESSID => Navn på trådløs netværk
Helptext DNS save => Gem ændringer på denne side før du tilføjer eller fjerner DNS servere. (Hvis ikke du vil miste dem.)

Helptext Operation mode => Sætter driftstilstanden for den trådløse del af routeren.  'Klient' og 'Klient (bro)' bruges til at forbinde 2 trådløse routere.  I mange tilfælde er WDS en bedre (men mere avanceret) løsning.  'Klient' udnytter dog båndbredden bedst, hvis du vitterlig kun har en maskine tilsluttet.  
 Indstillingen 'Klient (bro)' ændrer ikke direkte ved netværksindstillingerne. Det er et beskidt hack som får routeren til at foregiver at kun en maskine (et MAC nummer) er tilsluttet. Det sker for at overvinde et problem i 802.11 protokollen, som forhindrer at man problemfrit (i almindelig 'Klient'-tilstand) kan bruge den trådløse forbindelse fra flere maskiner samtidig. 
 AP bruges til en standalone router, hvor f.eks. bærbare computere skal have adgang til Internet og/eller lokalnet. 
 Hvis du ikke ved hvad 'Ad Hoc' tilstanden gør, har du højst sandsynligt ikke brug for den.

Helptext Encryption Type => 'WPA (RADIUS)' er kun understøttet i AP (Access Point) tilstand. 
 'WPA (PSK)' fungerer ikke i 'Ad-Hoc' tilstand.

Helptext IP Settings => IP indstilinger er frivillig for DHCP og PPTP.  Når de er sat, bliver de brugt som standværdiger, hvis der ikke er en tilgængelig DHCP server.

Helptext Idle Time => Ventetid i sekunder før inaktivitet bliver årsagen til at forbindelsen afbrydes.

Helptext Redial Timeout => Ventetid før der prøves at ringe op igen.

## new format
## you are free to translate the part between "new format comments"
## replace any text after "=" and ">" with your translation

## network hosts
network_hosts_host_IP_invalid => Host's IP Address
network_hosts_Host_Name => Værtsnavn
network_hosts_MAC => MAC adresse
network_hosts_static_IP_invalid => Static IP Address
network_hosts_Configured_Hosts => Værtsnavne
network_hosts_Host_Names => Værtsnavne
network_hosts_IP => IP adresse
network_hosts_Remove => Fjern
network_hosts_Add => Tilføje
network_hosts_Host_Names_helptext => The file /etc/hosts is used to look up the IP address of a device connected to a computer network. The hosts file describes a many-to-one mapping of device names to IP addresses. When accessing a device by name, the networking system attempts to locate the name within the hosts file before accessing the Internet domain name system.
network_hosts_DHCP_Static_IPs => Static IP addresses (for DHCP)
network_hosts_Static_IPs => Static IP addresses
network_hosts_Static_IPs_helptext => The file /etc/ethers contains database information regarding known 48-bit ethernet addresses of hosts on an Internetwork. The DHCP server uses the matching IP address instead of allocating a new one from the pool for any MAC address listed in this file.
network_hosts_Active_Leases => Active DHCP Leases
network_hosts_Name => Navn
network_hosts_Expires => Udløbstid
network_hosts_h => h
network_hosts_min => min
network_hosts_sec => sec
network_hosts_No_leases => There are no known DHCP leases.
Network => Netværk
Hosts => Værtsnavne

## status-leases.sh
Status => Status
DHCP Clients => DHCP Clients
status_leases_dhcp_leases => DHCP leasinger
status_leases_MAC => MAC adresse
status_leases_IP => IP adresse
status_leases_Name => Navn
status_leases_Expires => Udløbstid
status_leases_h => h
status_leases_min => min
status_leases_sec => sec
status_leases_no_leases => There are no known DHCP leases.
status_leases_dhcp_leases => DHCP Leases
status_leases_dhcp_leases_helptext => DHCP leases are assigned to network clients that request an IP address from the DHCP server of the router. Clients that requested their IP lease before this router was last rebooted may not be listed until they request a renewal of their lease.
status_leases_additional => Additional information
status_leases_arp_title => Address Resolution Protocol Cache (ARP)
status_leases_HW => HW Type
status_leases_Flags => Flags
status_leases_Mask => Mask
status_leases_completed => completed
status_leases_permanent => permanent
status_leases_published => published
status_leases_no_arp_record => ARP Cache does not contain any correspondent record.
status_leases_ethers_title => Ethernet Address to IP Number Database (/etc/ethers)
status_leases_ethers_empty => File /etc/ethers does not contain any Ethernet address/IP address pair.
status_leases_no_ethers => File /etc/ethers does not exist.

## status-usb.sh
status_usb_umount_error_in => Error in
Status => Status
USB => USB
status_usb_USB_Devices => USB Devices
status_usb_All_connected_devices => All connected devices (excluding system hubs)
status_usb_Bus => Bus
status_usb_Device => Device
status_usb_Product => Product
status_usb_Manufacturer => Manufacturer
status_usb_VPIDs => VendorID:ProdID
status_usb_USB_version => USB version
status_usb_Mounted_USB_SCSI => Mounted USB / SCSI devices
status_usb_filesystems => File systems
status_usb_Device_Path => Device Path
status_usb_Mount_Point => Mount Point
status_usb_File_System => File System
status_usb_Read_Write => Read/Write
status_usb_Action => Action
status_usb_ro => Read only
status_usb_rw => Read/Write
status_usb_umount => umount
status_usb_swaps => Swaps
status_usb_swap_PartitionFilename => Partition/Filename
status_usb_swap_Type => Type
status_usb_swap_Size => Size
status_usb_swap_Used => Used
status_usb_swap_Priority => Priority
status_usb_swap_partition => partition
status_usb_swap_file => file
status_usb_Loaded_USB_drivers => Loaded USB drivers

## status-wwaninfo.sh
Status => Status
UMTS => UMTS
status_wwaninfo_UG_Status => UMTS/GPRS Status
status_wwaninfo_no_UG_device => UMTS / GPRS device not found.
status_wwaninfo_device_info => Device Information
status_wwaninfo_dev_th_Information => Information
status_wwaninfo_dev_th_Value => Value
status_wwaninfo_no_UG_device_info => No device information reported.
status_wwaninfo_Signal_Quality => Signal Quality
status_wwaninfo_quality_unknown => Signal quality is invalid/unknown
status_wwaninfo_Power_Ratio => Power Ratio (dBm)
status_wwaninfo_Legend => Legend
status_wwaninfo_quality_Unreliable => Unreliable
status_wwaninfo_quality_Workable => Workable
status_wwaninfo_quality_Good => Good
status_wwaninfo_quality_Excellent => Excellent
status_wwaninfo_wrong_value => Wrong signal quality value

## new format

# untranslated:
Available packages => Available packages
 Show raw statistics  =>
802.11b =>
802.11b + 802.11g =>
802.11g (afterburner) =>
802.11g (performance) =>
802.11g (range - LRS) =>
802.11g with 802.11b deferred =>
Action =>
Active DHCP Leases =>
Add New NVRAM Setting =>
Add Repository =>
APN Name =>
APN Settings =>
Application Protocol =>
Auth Servers =>
Authentication =>
Authentication Method =>
Backup and Restore =>
Board =>
Board Type =>
Bulk =>
Bulk IP Address =>
Bulk TCP Port =>
Bulk TCP Ports =>
Bulk UDP Port =>
Bulk UDP Ports =>
Bytes =>
Cache Size =>
Certificate (PKCS12) =>
Certificate Status =>
Change NVRAM Setting =>
Check_Upgrade =>
Circular =>
Classify As =>
Config Name =>
Connection Settings =>
Conntrack Settings =>
Conntrack Table =>
Cron =>
Cron Jobs =>
Cron Tables =>
Current Repositories =>
Dangerous Settings =>
Data Rate Down =>
Data Rate Up =>
Delete NVRAM Setting =>
Device =>
Device Status =>
DHCP Bail =>
DHCP Configuration =>
DHCP Interfaces =>
DHCP Lease Minutes =>
DHCP Num =>
DHCP Server For =>
DHCP Service =>
DHCP Start =>
Distance =>
Diversity =>
Domain =>
Download =>
Download Configuration =>
Download Speed =>
DynDNS Settings =>
edit =>
edit_qos_cfg =>
Enable/Disable Unbridged Wireless =>
Encryption Key =>
Everything =>
Express =>
Express IP Address =>
Express TCP Port =>
Express TCP Ports =>
Express UDP Port =>
Express UDP Ports =>
EZ-IP-Update Messages =>
File =>
File Editor =>
Forwarding a port =>
Found Installed Certificate. =>
Found Installed Keyfile =>
Frameburst =>
Frequency =>
General System Settings =>
Generated =>
Generic Timeout =>
G-mode Protection =>
GPRS only =>
Group =>
Hostname =>
ICMP Timeout =>
Incoming Traffic =>
Install Package From URL =>
Interfaces Status =>
Isolate WLAN clients =>
kilobits =>
LAN Bridge WDS Connections =>
LAN DNS Servers =>
LAN IP Address =>
Layer 7 Filtering =>
Layer 7 Protocols =>
Layer7 =>
Lazy WDS On/Off =>
Lease Max =>
Left =>
Local Log =>
Log Debug Output =>
Log File =>
Log Queries =>
Long =>
Maximum Connections =>
Maximum Number Of Connections =>
Mesh Configuration =>
Meshing =>
Modify =>
Monowall_Credit =>
Name this configuration =>
NAS Package =>
Netfilter Log =>
Netstat =>
Networking Tweaks =>
new rule =>
No Certificate uploaded yet! =>
No Hosts =>
No Keyfile uploaded yet! =>
No Reg Cache =>
No Resolv =>
No WAN Proto =>
Noise Level =>
no_qos =>
No_Target_IP_Port =>
NTP Server =>
NVRAM settings to set (by prefix; be careful!) =>
OpenVPN =>
OpenVPN Status =>
Options For =>
or a close derivative =>
Outgoing Traffic =>
Packages Available =>
Parameters =>
Passphrase =>
Peer-2-Peer =>
Peername =>
PIN Code =>
Port range =>
Port Range =>
PPPoE Status =>
PPTP Client =>
PPTP Client Connection =>
PPTP Client Connections =>
PPTP Status =>
PPTP VPN Users =>
PPTPD Server =>
Preamble (Default: Long) =>
Preferred Connection Type =>
Prefix =>
Preshared Key =>
Preshared Key Status =>
Priority =>
Priority IP Address =>
Priority $n $d Ceiling =>
Priority $n $d Filter Sequence =>
Priority $n $d Quantum =>
Priority $n $d Rate =>
Priority TCP Port =>
Priority TCP Ports =>
Priority UDP Port =>
Priority UDP Ports =>
QOS Bulk IP Addresses =>
QOS Configuration =>
QOS Express IP Addresses =>
QOS Internet Speed Configuration =>
QOS Layer  Protocol Filtering =>
QoS Options =>
QoS Packages =>
QoS Packets  =>
QOS Priority Configuration =>
QOS Priority IP Addresses =>
QoS Rule Edit =>
QoS Service =>
QoS Traffic Classification Rules =>
Quality of Service Statistics =>
Radus =>
Raw Information =>
Read Ethers =>
Receive Antenna Diversity =>
Received =>
Remote host =>
remove =>
Repo. Name =>
Repo. URL =>
Repository URL =>
Reset to Defaults =>
Right =>
Router Listening Ports =>
Routing Table =>
Rx Invalid Encryption =>
Rx Invalid nwid =>
Saved config.tgz file: =>
Select Network =>
Server Address =>
Server Port (default: 1194) =>
Services Configuration =>
Shaping Status =>
Short =>
SIM Configuration =>
sorted_by_name =>
Split WLAN From Switch Bridge =>
Start VPN Connection =>
Startup =>
Strict Order =>
Submit =>
Survey Results =>
Syslog Messages =>
syslog Settings =>
Syslog View =>
TCP Established Timeout =>
TCP Timeout (in seconds) =>
Theme =>
Time Settings =>
Timezone =>
Traffic Shaping =>
Traffic Shaping Settings =>
Translator_Credit =>
Transmit Antenna Diversity =>
Transmit Power =>
Transmit Power (in mw) =>
Transmitted =>
Tx Invalid =>
Tx Missed Beacon =>
Tx Retries in Excess =>
UDP Stream Timeout =>
UDP Timeout =>
UDP Timeout (in seconds) =>
UMTS first =>
UMTS only =>
UMTS/GPRS Status =>
Upgrade_Webif =>
Upload Configuration =>
Upload PKCS12 Certificate =>
Upload Preshared Key =>
Upload Speed =>
Upload Successful =>
UPNP =>
UPNP Daemon =>
URL of Package =>
Value =>
Virtual LANs =>
VLAN Configuration =>
Wake-On-LAN =>
WAN DNS Address =>
WAN DNS Servers =>
WAN Down Data Rate =>
WAN Download (bits/sec) =>
WAN Download Speed =>
WAN IP Address =>
WAN Netmask =>
WAN Up Data Rate =>
WAN Upload (bits/sec) =>
WAN Upload Speed =>
WAN-LAN Configuration =>
WDS Configuration =>
WDS Options =>
WDS SSID =>
WDS watchdog timeout =>
Webif² Settings =>
Webif² Upgrade =>
WEP Key 1 =>
WEP Key 2 =>
WEP Key 3 =>
WEP Key 4 =>
Wireless Bridge Configuration =>
Wireless LAN Configuration =>
Wireless Mode =>
Wireless survey =>
wol_help =>
Committing =>
config file =>
conntrack settings =>
Critical Error =>
Done =>
firewall settings =>
hotspot settings =>
networking settings =>
PPTP settings =>
Processing =>
QOS settings =>
Reloading Cron =>
Reloading syslogd ... =>
Restarting =>
system settings =>
theme settings =>
traffic shaping settings =>
UPNPd =>
wireless settings =>
Directory =>
Filesystem Browser =>
Parent Directory =>
Root =>
Short help =>
Invalid value =>
maximum =>
Administrative Console =>
making_usable =>
qos_enabled => Aktiveret
qos_adv_enabled => Aktiveret
qos_disabled => Deaktiveret
qos_adv_disabled => Deaktiveret
