\documentclass[11pt, a4paper]{article}
\usepackage[a4paper, text={16cm,25cm}]{geometry}

%\VignetteIndexEntry{covMcd() -- Generalizing the FastMCD}
%\VignetteDepends{robustbase}
\SweaveOpts{prefix.string=mcd, eps=FALSE, pdf=TRUE, strip.white=true}
\SweaveOpts{width=6, height=4.1}

\usepackage{amsmath}
\usepackage{amsfonts}% \mathbb
\usepackage{mathtools}% -> \floor, \ceil
\usepackage[utf8]{inputenc}
%% The following is partly R's share/texmf/Rd.sty
\usepackage{color}
\usepackage{hyperref}
\definecolor{Blue}{rgb}{0,0,0.8}
\definecolor{Red}{rgb}{0.7,0,0}
\hypersetup{%
  hyperindex,%
  colorlinks={true},%
  pagebackref,%
  linktocpage,%
  plainpages={false},%
  linkcolor={Blue},%
  citecolor={Blue},%
  urlcolor={Red},%
  pdfstartview={Fit},%
  pdfview={XYZ null null null}%
}

\usepackage{natbib}
\usepackage[noae]{Sweave}
%----------------------------------------------------
\DeclarePairedDelimiter{\ceil}{\lceil}{\rceil}
\DeclarePairedDelimiter{\floor}{\lfloor}{\rfloor}
\DeclareMathOperator{\sign}{sign}
\newcommand{\abs}[1]{\left| #1 \right|}
\newtheorem{definition}{Definition}
\newcommand{\byDef}{\mathrm{by\ default}}
\newcommand{\R}{{\normalfont\textsf{R}}{}}
\newcommand{\code}[1]{\texttt{#1}}
\newcommand*{\pkg}[1]{\texttt{#1}}
\newcommand*{\CRANpkg}[1]{\href{http://CRAN.R-project.org/package=#1}{\pkg{#1}}}

%----------------------------------------------------
\begin{document}
\setkeys{Gin}{width=0.9\textwidth}
\setlength{\abovecaptionskip}{-5pt}

\title{covMcd() -- Considerations about Generalizing the FastMCD}
\author{Martin M\"achler}
\maketitle
%\tableofcontents
%%
%% Pison, G., Van Aelst, S., and Willems, G. (2002)
%% Small Sample Corrections for LTS and MCD.
%% Metrika % ~/save/papers/robust-diverse/Pison_VanAelst_Willems.pdf
%%
<<init, echo=FALSE>>=
# set margins for plots
options(SweaveHooks=list(fig=function() par(mar=c(3,3,1.4,0.7),
                         mgp=c(1.5, 0.5, 0))),
        width = 75)
@

\section{Introduction}
The context is robust multivariate ``location and scatter'' estimation,
which corresponds to estimating the first two moments in cases they exist.
We assume data and a model
\begin{align}
  \label{eq:data-model}
  x_i & \in  \mathbb{R}^p, \ \ i=1,2,\dots,n \\
  x_i & \sim \mathcal{F}(\mu, \Sigma), \ \ \mathrm{i.i.d.};\ \
  \mu \in \mathbb{R}^p, \ \ \Sigma \in \mathbb{R}^{p \times p}, \ \textrm{positive definite},
\end{align}
where a conceptual null model is the  $p$-dimensional normal distribution.
One typical assumption is that $\mathcal{F}$ is a mixture with the majority
component (``good data'') being $\mathcal{N}_p(\mu, \Sigma)$ and other components
modeling ``the outliers''.

In other words, we want estimates $\bigl(\hat{\mu}, \hat{\Sigma}\bigr)$ which should
be close to the true ``good data'' $(\mu, \Sigma)$ --- and do not say more here.

\section{MCD and ``the Fast'' MCD (= \textsc{fastmcd}) Algorithm}
The \CRANpkg{robustbase} \R{} package has featured a function
\code{covMcd()} since early on (Feb.~2006)
and that has been an interface to the Fortran routine provided by the
original authors and (partly) described in \citet{RouPvD99}.
%% Rousseeuw, P. J. and van Driessen, K. (1999)
%% A fast algorithm for the minimum covariance determinant estimator.
%% Technometrics {41}, 212--223.
%% >> ~/save/papers/robust-diverse/Rousseeuw_VanD-FastMCD_1999.pdf
%     ------------------------------------------------------------
We describe shortly how the algorithm works, partly building on the
documentation provided in the source (R, S, and Fortran) codes:

%%  R CMD Rdconv --type=latex ../../man/covMcd.Rd > covMcd.tex
The minimum covariance determinant estimator of location and scatter (MCD)
implemented in \code{covMcd()} is similar to \R{} function
\code{cov.mcd()} in \CRANpkg{MASS}.  The (``theoretical'') MCD looks for
the $h = h_\alpha (> 1/2)$ out of $n$ observations whose classical covariance
matrix has the lowest possible determinant.  In more detail, we will use
$h = h_\alpha = h(\alpha,n,p) \approx \alpha \cdot (n+p+1)$,
where as \citet{RouPvD99} mainly use (the default) $\alpha = \frac 1 2$,
where $h = h(1/2, n, p) = \floor[\Big]{\frac{n+p+1}{2}}$.
For general $\alpha \ge \frac 1 2$, the \R{} implementation (derived
from their original S code) uses
$h = h(\alpha,n,p) =$ \code{h.alpha.n(alpha,n,p)} (function in
\pkg{robustbase}), which is
\begin{eqnarray}
  \label{eq:def-h}
  h = h_\alpha = h(\alpha,n,p) := \floor{2 n_2 - n + 2 \alpha (n - n_2)}, \
  \mathrm{where\ } n_2 := \floor[\Big]{\frac{n+p+1}{2}}%
  %= (n+p+1)/2 \ \ (\mathrm{\ where ``/'' denotes \emph{integer} division})
  .
\end{eqnarray}
The fraction $\alpha \ge \frac 1 2$ can be chosen by the user,
where $\alpha = \frac 1 2$ is the most robust, and indeed, $h_{1/2} = n_2 =
\floor[\Big]{\frac{n+p+1}{2}}$.  Even in general, as long as $n \gg p$,
$\alpha$ is approximately the \emph{proportion} of the subsample size $h$ in
the full sample (size $n$):
\begin{equation}
  \label{eq:h.approx}
  h \approx \alpha \cdot n \iff \alpha \approx \frac{h}{n},
\end{equation}
<<h.alpha.ex>>=
require(robustbase)
n <- c(5, 10, 20, 30, 50, 100, 200, 500)
hmat <- function(alpha, p) cbind(n, h.alpha = h.alpha.n (alpha, n,p),
        h. = floor(alpha * (n + p + 1)), alpha.n = round(alpha * n))
hmat(alpha = 1/2, p = 3)
hmat(alpha = 3/4, p = 4)
@

The breakdown point (for $h > \frac{n}{2}$) then is
\begin{eqnarray}
  \label{eq:breakdown}
  \epsilon_{*} = \frac{n-h+1}{n},
\end{eqnarray}
which is less than but close to $\frac 1 2$ for $\alpha = \frac 1 2$, and in general,
$h/n \approx \alpha$, the breakdown point is approximately,
\begin{eqnarray}
  \label{eq:eps-approx}
  \epsilon_{*} = \frac{n-h+1}{n} \approx \frac{n-h}{n} = 1 - \frac{h}{n}
  \approx 1 - \alpha.
\end{eqnarray}


The raw MCD estimate of location, say $\hat{\mu}_0$, is then the average of these $h$ points,
whereas the raw MCD estimate of scatter, $\hat{\Sigma}_0$, is their covariance matrix,
multiplied by a consistency factor \code{.MCDcons(p, h/n)}) and (by default)
a finite sample correction factor \code{.MCDcnp2(p, n, alpha)}, to make it
consistent at the normal model and unbiased at small samples.
%% Both rescaling factors (consistency and finite sample) are returned in the length-2 vector
%% \code{raw.cnp2}.

In practice, for reasonably sized $n$, $p$ and hence $h$, it is not
feasible to search the full space of all $n \choose h$ $h$-subsets of $n$
observations.  Rather, the implementation of \code{covMcd} uses the Fast
MCD algorithm of \citet{RouPvD99} to approximate the minimum covariance
determinant estimator, see Section~\ref{sec:fastMCD}.

Based on these raw MCD estimates, $\bigl(\hat{\mu}_0, \hat{\Sigma}_0\bigr)$,
% (unless argument \code{raw.only} is true),
a reweighting step is performed, i.e., \code{V <- cov.wt(x,w)},
where \code{w} are weights determined by ``outlyingness''
with respect to the scaled raw MCD, using the ``Mahalanobis''-like, robust distances
$d_i\bigl(\hat{\mu}_0, \hat{\Sigma}_0\bigr)$, see (\ref{eq:Maha}).
Again, a consistency factor and
%(if \code{use.correction} is true)
a finite sample correction factor %(\code{.MCDcnp2.rew(p, n, alpha)})
are applied.
The reweighted covariance is typically considerably more efficient
than the raw one, see \citet{PisGvAW02}.

The two rescaling factors for the reweighted estimates are returned in
\code{cnp2}.  Details for the computation of the finite sample
correction factors can be found in \citet{PisGvAW02}.

\section{Fast MCD Algorithm -- General notation}\label{sec:fastMCD}

\paragraph{Note:} In the following, apart from the mathematical notation, we also use
variable names, e.g., \code{kmini}, used in the Fortran and sometimes \R{} function code,
in \R{} package \CRANpkg{robustbase}.

Instead of directly searching for $h$-subsets (among ${n \choose h} \approx
{n \choose n/2}$) the basic idea is to start with small subsets of size
$p+1$, their center $\mu$ and covariance matrix $\Sigma$, and a corresponding $h$-subset
of the $h$ observations with smallest (squared) (``Mahalanobis''-like) distances
\begin{align}  \label{eq:Maha}
d_i = d_i(\mu,\Sigma) :=  (x_i - \mu)' \Sigma^{-1} (x_i - \mu), \ \ i=1,2,\dots,n,
\end{align}
and then use concentration
steps (``C~steps'') to (locally) improve the chosen set by iteratively
computing $\mu$, $\Sigma$, new distances $d_i$ and a new set of size $h$ with
smallest distances $d_i(\mu,\Sigma)$. Each C~step is proven to decrease the
determinant $\det(\Sigma)$ if $\mu$ and $\Sigma$ did change at all.
Consequently, convergence to a local minimum is sure, as the number of $h$-subsets is finite.

To make the algorithm \emph{fast} for non small sample size $n$ the data set is
split into ``groups'' or ``sub-datasets'' as soon as
\begin{eqnarray} \label{eq:nmini}
  n \ge 2 n_0, \ \mathrm{ where}\ \  n_0 := \mathtt{nmini} \ ( = 300, \byDef).
\end{eqnarray}
i.e., the default cutoff for ``non small'' is at $n = 600$.
%%
The \emph{number} of such subsets in the original algorithm is maximally 5,
and we now use
\begin{eqnarray}  \label{eq:kmini}
  k_M = \code{kmini} \ (= 5, \byDef),
\end{eqnarray}
as upper limit. As above, we assume from now on that $n \ge 2 n_0$, and let
\begin{eqnarray} \label{eq:k-def}
  k := \floor[\Big]{\frac{n}{n_0}} \ge 2
\end{eqnarray}
and now distinguish the two cases,
\begin{eqnarray}
  \label{eq:cases}
  \begin{cases}
    A. & k   < k_M  \iff n  <  k_M \cdot n_0 \\
    B. & k \ge k_M  \iff n \ge k_M \cdot n_0
  \end{cases}
\end{eqnarray}
\begin{description}
\item[In case A] $k$ (\code{= ngroup}) subsets aka ``groups'' or ``sub datasets''
  are used, $k \in\{2,3,\dots,k_M-1\}$, of group sizes $n_j$,
  $j=1,\dots,k$ (see below).  Note that case~A may be empty because of $2
  \le k < k_M$, namely if $k_M=2$.  Hence, in case~A, we have $k_M \ge 3$.
\item[in case B] $k_M$ (\code{= ngroup}) groups each of size $n_0$ are
  built and in the first stage, only a \emph{subset} of $k_M \cdot n_0 \le n$
  observations is used.
\end{description}
In both cases, the disjoint groups (``sub datasets'') are chosen at random
from the $n$ observations.
%%
For the group sizes for case~A, $n_j$, $j=1,\dots,k$, we have
\begin{align}
  n_1 = \; & \floor[\Big]{\frac n k} =
             \floor[\bigg]{\frac{n}{\floor[\big]{\frac{n}{n_0}}}} \ \ (\; \ge n_0 \label{eq:n1})\\
  n_j = \; & n_1,\hspace*{2.8em} j = 2,\dots,j_* \\
  n_j = \; & n_1 + 1, \ \ \    j = j_* +1,\dots,k, \label{n1-plus-1}\\
  & \qquad \mathrm{where}\ \ j_* := k - r \ \in \{1,\dots,k\}, \label{jstar}\\
  & \qquad \mathrm{and}\ \  r := n - k n_1 = \label{r-rest}
                           n - k\floor[\big]{\frac n k} \in \{0,1,\dots,k-1\},
\end{align}
where the range of $j_*$, $1,\dots,k$ in (\ref{jstar}) is a consequence of the range of
the integer division remainder $r \in \{0,1,\dots,k-1\}$ in
(\ref{r-rest}).  Consequently, (\ref{n1-plus-1}) maybe empty, namely iff
$r=0$ ($\iff n = k \cdot n_1$ is a multiple of $k$): $j_* = k$, and all $n_j \equiv n_1$.

Considering the range of $n_j$ in case~A, the minimum $n_1 \ge n_0$ in
(\ref{eq:n1}) is easy to verify.  What is the maximal value of $n_j$ , i.e.,
an upper bound for $n_{\max} := n_1+1 \ge \max_j n_j$? \
%%
%% This is all correct but not useful:
%% From (\ref{eq:n1}),     $ n/k - 1 < n_1 \le n/k  $, and
%% from (\ref{eq:k-def}),  $n/n_0 - 1 < k  \le n/n_0$.
%% Putting these two together, we get
%% \begin{eqnarray}
%%   \label{eq:n1-ineq}
%%   \frac{n^2}{n_0} - 1 \le n/k - 1 < n_1 \le n/k < \frac{n n_0}{n - n_0},
%% \end{eqnarray}
%% (the first $\le$ from $\frac{1}{k} \ge \frac{n_0}{n}$; the last $<$ from
%% $\frac{1}{k} < \frac 1{n/n_0 -1} = \frac{n_0}{n-n_0}$.) Also,
%% from (\ref{eq:k-def}), $n \ge k n_0$ and $n-n_0 \ge (k-1)n_0$ and since we
%% are in case~A, $n < n_0 k_M$, which combines to
%% \begin{eqnarray}
%%   \label{eq:nn0}
%%   \frac{n n_0}{n - n_0} < \frac{(n_0 k_M) n_0}{(k-1)n_0} = \frac{n_0 k_M}{k-1}.
%% \end{eqnarray}
Consider $n_{1,\max}(k) = \max_{n, \mathrm{given\ } k} n_1 = \max_{n, \mathrm{given\ } k} \floor{\frac n k}$.
Given $k$, the maximal $n$ still fulfilling $\floor[\big]{\frac{n}{n_0}} = k$
is $n = (k+1)n_0 - 1$ where $\floor[\big]{\frac{n}{n_0}} = k + \floor[\big]{1 - \frac{1}{n_0}} = k$.
Hence, $n_{1,\max}(k) =\floor[\big]{\frac{(k+1)n_0 - 1}{k}} = n_0 +
\floor[\big]{\frac{n_0 - 1}{k}}$, and as $k \ge 2$, the maximum is at $k=2$,
$\max n_1 = \max_k n_{1,\max}(k) = n_0 + \floor[\big]{\frac{n_0 - 1}{2}} = \floor[\big]{\frac{3 n_0 - 1}{2}}$.
Taken together, as $n_j = n_1+1$ is possible, we have
\begin{align}
  \label{eq:nj-range}
  n_0 \le & n_1  \le \floor[\Big]{\frac{3 n_0 - 1}{2}} \nonumber\\
  n_0 \le & n_j  \le \floor[\Big]{\frac{3 n_0 + 1}{2}}, \ \ j \ge 2.
\end{align}
Note that indeed, $\floor[\big]{\frac{3 n_0 + 1}{2}}$ is the length of the
auxiliary vector \code{subndex} in the Fortran code.

\bibliographystyle{chicago}
\bibliography{robustbase}

\end{document}
